Alarms Screen - Graco GLC 4400 Instructions Manual

Run Mode

Alarms Screen

When a cycle alarm event occurs the Alarm Screen,
shown in F . 63 displays.
IG
F . 63
IG
To clear an alarm, hold down the Clear Key on the dis-
play Keypad (see page 3).
The following is a list of other alarm events that may dis-
play.
Low Level Alarm. Icon appears on display screen.
Indicates the lubrication fluid level is low.
Pressure mode error. Icon displays on alarm screen
to signal the allotted time ran out before the pressure
switch was tripped.
Machine count error. When icon displays on alarm
screen, indicates the set number of machine counts
was not received before time expired. This would
trigger an alarm event.
Cycle switch input error. Icon displays in center of
Alarm screen to indicate the allotted time ran out
before the programmed number of cycle switch
activations was received.
40 313855K