Table of Contents
Advertisement
Table 13 Network Setting > Broadband > Advanced (continued)
LABEL
8a, 8b, 8c, 8d,
12a, 12b, 17a,
US0
Apply
Cancel
6.5 The Ethernet WAN Screen
Use the Ethernet WAN screen to convert LAN port number four as a WAN port for Ethernet
Internet access and to restore it back from a WAN port to a LAN port.
It's not enough to just enable LAN 4 as a WAN port here. You must also go to Network Setting >
Broadband screen and create a new interface for it with the Type as Ethernet and
Encapsulation as IPoE, and it's advisable to enable NAT.
Note: You cannot have DSL and Ethernet WAN connections working at the same time.
Click Network Setting > Broadband > Ethernet WAN to display the following screen.
Figure 29 Network Setting > Broadband > Ethernet WAN
The following table describes the labels in this screen.
Table 14 Network Setting > Network Setting > Ethernet WAN
LABEL
Active
Apply
Cancel
Chapter 6 Broadband
DESCRIPTION
The G.993.2 VDSL standard defines a wide range of profiles that can be used in different
VDSL deployment settings, such as in a central office, a street cabinet or a building.
The VMG must comply with at least one profile specified in G.993.2. but compliance with
more than one profile is allowed.
Click Apply to save your changes back to the VMG.
Click Cancel to return to the previous configuration.
DESCRIPTION
Select Enable to convert LAN port number four to a WAN port.
Select Disable to restore LAN port number four to a LAN port.
Click Apply to save your changes back to the VMG.
Click Cancel to return to the previous configuration.
VMG1312-Bx0D User's Guide
79
Advertisement
Table of Contents
