Figure 99 Interface Grouping Application
DHCP Vendor ID option: MSFT 5.0
Click Network Setting > Interface Grouping to open the following screen.
Figure 100 Network Setting > Interface Grouping
The following table describes the fields in this screen.
Table 73 Network Setting > Interface Grouping
LABEL
Add New
Interface Group
Group Name
WAN Interface
LAN Interfaces
Criteria
Modify
14.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Grouping screen to open the
following screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Chapter 14 Interface Grouping
Default: ETH 2~4
192.168.1.x/24
192.168.2.x/24
DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
This shows the filtering criteria for the group.
Click the Delete icon to remove the group.
VMG1312-Bx0D User's Guide
eth10.0
VDSL_PoE/ppp0.1
180