The Qos Shaper Setup Screen - ZyXEL Communications VMG1312-Bx0D User Manual

Wireless n vdsl2 gateway with usb
Hide thumbs Also See for VMG1312-Bx0D:
Table of Contents

Advertisement

Table 48 Classification Setup: Add/Edit (continued)
LABEL
VLAN ID Tag
Step4: Class Routing
Forward to
Interface
Step5: Outgoing Queue Selection
To Queue Index
OK
Cancel

10.6 The QoS Shaper Setup Screen

This screen shows that you can use the token bucket algorithm to allow a certain amount of large
bursts while keeping a limit for processing outgoing traffic at the average rate. Click Network
Setting > QoS > Shaper Setup. The screen appears as shown.
Figure 73 Network Setting > QoS > Shaper Setup
The following table describes the labels in this screen.
Table 49 Network Setting > QoS > Shaper Setup
LABEL
Add New
Shaper
#
Status
Outgoing
Interface
Rate Limit
(kbps)
Modify
Chapter 10 Quality of Service (QoS)
DESCRIPTION
If you select Remark, enter a VLAN ID number with which the VMG replaces the VLAN ID of
the frames.
If you select Remove, the VMG deletes the VLAN ID of the frames before forwarding them
out.
If you select Add, the VMG treat all matched traffic untagged and add a second VLAN ID.
If you select Unchange, the VMG keep the VLAN ID in the packets.
Select a WAN interface through which traffic of this class will be forwarded out. If you select
Unchange, the VMG forward traffic of this class according to the default routing table.
Select a queue that applies to this class.
You should have configured a queue in the Queue Setup screen already.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to create a new entry.
This is the index number of the entry.
This field displays whether the shaper is active or not. A yellow bulb signifies that this
policer is active. A gray bulb signifies that this shaper is not active.
This shows the name of the VMG's interface through which traffic in this shaper applies.
This shows the average rate limit of traffic bursts for this shaper.
Click the Edit icon to edit the shaper.
Click the Delete icon to delete an existing shaper. Note that subsequent rules move up by
one when you take this action.
VMG1312-Bx0D User's Guide
149

Advertisement

Table of Contents
loading

Table of Contents