Table of Contents
Advertisement
Reset the device to its factory defaults, and try to access the VMG with the default IP address. See
5
Section 1.7 on page
If the problem continues, contact the network administrator or vendor, or try one of the advanced
6
suggestions.
Advanced Suggestions
• Make sure you have logged out of any earlier management sessions using the same user account
even if they were through a different interface or using a different browser.
• Try to access the VMG using another service, such as Telnet. If you can access the VMG, check
the remote management settings and firewall rules to find out why the VMG does not respond to
HTTP.
I can see the Login screen, but I cannot log in to the VMG.
Make sure you have entered the password correctly. See the cover page for the default login names
1
and associated passwords. The field is case-sensitive, so make sure [Caps Lock] is not on.
You cannot log in to the web configurator while someone is using Telnet to access the VMG. Log out
2
of the VMG in the other session, or ask the person who is logged in to log out.
Turn the VMG off and on.
3
If this does not work, you have to reset the device to its factory defaults. See
4
253.
I cannot Telnet to the VMG.
See the troubleshooting suggestions for
configurator.
Ignore the suggestions about your browser.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload
new firmware.
See the troubleshooting suggestions for
configurator.
Ignore the suggestions about your browser.
Chapter 38 Troubleshooting
20.
I cannot see or access the Login screen in the web
I cannot see or access the Login screen in the web
VMG1312-Bx0D User's Guide
255
Section 38.1 on page
Advertisement
Table of Contents
