Table of Contents
Advertisement
You can configure your wireless network in either the built-in Web Configurator, or using the WPS
button.
Figure 6 Wireless Access Example
1.5.1 Using the Wi-Fi and WPS Buttons
If the wireless network is turned off, press the WLAN button for one second. Once the WLAN/
WPS LED turns green, the wireless network is active.
You can also use the WPS button to quickly set up a secure wireless connection between the VMG
and a WPS-compatible client by adding one device at a time.
To activate WPS:
Make sure the POWER LED is on and not blinking.
1
Press the WPS button for two seconds and release it.
2
Press the WPS button on another WPS-enabled device within range of the VMG. The WLAN/WPS
3
LED flashes orange while the VMG sets up a WPS connection with the other wireless device.
Once the connection is successfully made, the WLAN/WPS LED shines green.
4
To turn off the wireless network, press the WLAN button for one to five seconds. The WLAN/WPS
LED turns off when the wireless network is off.
1.6 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 7 LEDs on the VMG
Chapter 1 Introducing the VMG
VMG1312-Bx0D User's Guide
19
Advertisement
Table of Contents
