The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
5. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the LRP Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the LRP Managed
Switch through the new IP address.
If you are not familiar with console command or the related
parameter, enter "?" anytime in console to get the help description.
Note
8
Figure 5-2: IP Address Screen