10. Recovering Back to Default Configuration
IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address "192.168.0.100" or reset the
login password to default value, press the hardware reset button on the front
panel for about 10 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of 192.168.0.xx.
Console
115200, N, 8, 1
LRP-1622CS
Console
115200, N, 8, 1
LRP-822CS
1
SYS
RESET
PWR
Figure 10-1: LRP-822CS Reset Button
2
1
SYS
RESET
PWR
1
Figure 10-2: LRP-1622CS Reset Button
8-Port
Long Reach PoE
CAUTION
The LRP interface is
allowed to connect to
LRP Extender only.
LNK
PoE In-Use
CAUTION
4
The LRP interface is
allowed to connect to
LRP Extender only.
3
2
LNK
3
+ 2-Po
2
4
17
6
5
5