Planet LRP-822CS Quick Installation Manual page 13

Multi-port coax + 2-port 10/100/1000t + 2-port 100/1000x sfp long reach poe over coaxial managed switch

Hide thumbs Also See for LRP-822CS:

Table of Contents

4. Enable Long Reach Power over Ethernet function for the all LRP ports from

WebUI.

5. Check the LNK LED of the Long Reach Power over Ethernet interface on the

front of the LRP Managed Switch. Ensure that the Long Reach Power over

Ethernet interface is operating correctly.

1. Before installation, please consider the distance and watts

value demand for PD devices. The LRP Managed Switch and

LRP Extender PoE output capacity and upload / download

performance depend on the length of coaxial cable. You can

refer to manual chapter 1.5 for the information.

Note

2. As there are various resistance values in the category of

RG-59/U or RG-6/U cable, the actual data rate will vary on the

quality of the copper wire and environmental factors.

Table of Contents

Lrp-1622cs