Yardworks 60-3869-2 Owner's Manual page 11

Nozzles (Fig. F)
The two nozzles extend the reach of the blower.
For blowing (Fig. F):
1. Align the widest end of the large nozzle (1) with the front opening on the blower (2).
2. Slide the nozzle over the blower outlet opening until the latch on the blower is inserted into the opening on the nozzle.
3. Slide the smaller tapered nozzle (3) over the large nozzle until the latch on the large nozzle is inserted into the end of the
opening on the small nozzle and locks into position.
2
1
3
Fig. F
11