QuickShow FB3-QS User Manual page 96

96
Specifying a projection zone within the cue properties
You can access the properties of each cue by right-clicking on that cue and choosing Cue Properties.
The Destination section controls the destination of the cue (i.e. where the cue will be routed once it is
triggered). Note that you can specify that the cue be directed to more than one zone (i.e. laser)
simultaneously, so if you check both the "Zone 1" and "Zone 2" boxes above, the cue will be directed to
both lasers simultaneously.
You may go through each cue in the workspace and specify which zone (i.e. laser) you want to use for
that cue. For certain applications, this makes sense, but greater flexibility is afforded by using "Zone hot
keys".
Using "zone hot keys"
You may split the Laser Preview window into nine separate zones by right-clicking in the Preview
Window and selecting "Show 9 zones".