Quicktargets (Beam Sequencing) - QuickShow FB3-QS User Manual

62

QuickTargets (Beam Sequencing)

The QuickTargets tool allows you to quickly create targeted beams and beam sequences. Simply click
on the QuickTargets tab at the bottom of the screen and you will see the QuickTargets tool. (Note that
you will not see the QuickTargets feature until you have setup the QuickTargets Beam Settings.)
The main features of the QuickTargets tool are shown and described in the picture below.
As shown, you simply add as many steps as you want in the sequence, choose the colors and beams you
want for each step, indicate the step duration, and then either Show it now, or drag and drop the
sequence to a cue for playback later.
Adding steps to create a sequence
Although the QuickTargets tool can be used to trigger a single beam or several beams to output
continually (thus requiring only a single Step), typically the QuickTargets tool is used to make beam
sequences. To create a sequence, you must first add as many steps as you want in the sequence. For
example, if you want to have a four-step sequence, simply click on the + button until you see four steps.
Turning on beams at each step
To turn on beam number 1 at step number 1, simply click the mouse in the column number "Beam 1"
and in the row to the right of Step 1.
Beam numbers increase in columns to the right. Step numbers increase in row numbers downward.
Note that you can make a beam any of the brightest and most popular colors. Simply click on the color
you want before clicking on the beam. If you want to turn the beam off, simply click it again.