QuickShow FB3-QS User Manual page 29

Recommended use of the first eight zones
Although we do not restrict the use of zones in any way, for maximum compatibility Pangolin
recommends that the first 8 projection zones be used as follows:
Zone Scanner
Zone 1 Scanner 1
Zone 2 Scanner 2
Zone 3 Scanner 3
Zone 4 Scanner 4
Zone 5 Any scanner
Zone 6 Any scanner
LD2000 zones)
Zone 7 Any scanner
within the audience area
Zone 8 Any scanner
compatibility with LD2000 zones)
Zone 30 Any scanner
Sending cues to specific Projection zones
Projection Zones can be specified within QuickShow cues, so that when you trigger a cue, it will
automatically be sent to one or more specific zones. See the help topic about Cue Properties for more
information.
-Projection Zones are not available in Beginner mode
The Projection Zones menu and window are only visible when you have the User Level set to
Intermediate or Advanced mode. They do not appear if you are in Beginner mode.
Name Comment
Scanner 1 Main Used for most common output
Scanner 2 Main Used for anything directed to scanner 2
Scanner 3 Main Used for anything directed to scanner 3
Scanner 4 Main Used for anything directed to scanner 4
Secondary Graphics Used for a second graphics screen
Raster Graphics Reduced in size used for raster graphics (retained for compatibility with
Hot Beams Used for high-intensity beams which may or may not be directed
Atmospheric Effects Used for atmospherics and audience scanning (retained for
29