QuickShow FB3-QS User Manual page 105

Echo
This controls whether or not QuickShow will send MIDI messages received by this device back out
to the MIDI Output device. Normally Echo is not enabled, but it may be handy in situations where
QuickShow is incorporated into the MIDI stream of an intricate MIDI music studio. All normal
messages will be echoed but System Exclusive (SYSEX) messages will not be echoed.
Important Note: If the Channel is not set to "Use original Channel" then events that are "echoed"
will have their channel number modified as specified in the Channel drop down list box.
Output Options
This tab allows you to enable and disable the Metronome.
MIDI Metronome
Since QuickShow has a built-in Beat system, it is desirable to have an audible "metronome" while
you are setting up your QuickShow workspace. If you select the Enable metronome option, you can
select the General MIDI Program (type of sound) and Note (pitch of the sound) used for the
Metronome function. Program number 47 and 116 are percussive sounds and seem appropriate to be
105