Projector Settings - QuickShow FB3-QS User Manual

16

Projector Settings

The Projector Settings window allows you to configure QuickShow for your of projector. Available
settings include size, position, scan rate, color shift, number of colors and color levels. The first page of
the Projector Settings window is shown and described in the picture below.
Setting the Master size and position, and extra options
Within the Master size and position tab shown above, the most important thing to do is to show a test
pattern, and then adjust the size and position tool to fit the projected output to your projection screen (or
area), and also the Invert X, Invert Y and Swap XY check boxes. We have noticed that some projector
manufacturers require one or more of these check boxes to be checked in order for the "TOP" to look
properly.