QuickShow FB3-QS User Manual page 13

13
Setup the projector settings and targeted beam positions next
Although QuickShow can make the most important adjustments to the user interface and projector setup
based on the selections that you made above, it is important to use the Projector Settings window to
fine-tune QuickShow's output to your projector. Once that part is finished, it is important to setup the
targeted beam positions after that.
Selecting your language
QuickShow currently supports the ability to show the user interface in English, Chinese, French, Dutch,
German and Portuguese languages. This is selected with the Language menu, located on the far right
side of the menu strip, as shown below.
QuickShow can also easily support other languages as well. If you are interested in using QuickShow in
a language that is not shown above, please contact Pangolin to discuss how this can be accomplished.