QuickShow FB3-QS User Manual page 61

61
When the tracing mode is set to Highlight separation or Centerline, the Separation Level slider will
be available for adjustment. Simply click and drag your mouse in the slider area, and move the slider
back and forth until you get the best looking output image.
Modifying the overall size, position and rotation angle
The four buttons under the preview window allow you to control the size, position, and rotation angle of
the shape. These work in exactly the same way as the Live Performance Tools within a cue. Simply
click down the mouse over one of the controls, and then drag the mouse either upward or downward to
affect the image.
Displaying the traced image momentarily
To display the traced image that you have created, simply click on the Show it now button.
Saving the QuickTrace to a cue
You can save the QuickTrace to a cue for more permanent storage or for use later. Simply drag and drop
the preview window (or the QuickTrace tab itself) to a cue. Everything about the QuickTrace will be
saved into the cue, including the size, position, rotation, speed, color and font as seen in the preview
window.
Editing the image after it has been traced
Once you drag and drop the traced image to a cue, you can use the Frame/Animation editor to edit the
traced image. For example, you could recolor all or part of the traced image, you could select and then
delete certain parts, etc.