QuickShow FB3-QS User Manual page 33

33
DMX to USB device needed
Note that in order to use DMX for either input or output, you must first acquire a DMX to USB
converter device. Currently QuickShow supports only the DMX USB PRO controller from the company
ENTTEC. This is a very popular device which is freely available from many vendors on the internet.
Pangolin also normally carries a limited stock of these devices as well.
DMX daughter board on FB3-SE can not be used
Also note that if you have a FB3-SE with a DMX daughter board installed, this can not be used for
DMX input or output with QuickShow. The DMX daughter board on the FB3 is only used by the FB3
for direct FB3 control and playback.