Operating The Parking Brake; Operating The Throttle; Operating The Choke; Operating The Ignition Switch - Toro TITAN ZX 5400 Operator's Manual

Operating the Parking Brake

Always set the parking brake when you stop the machine or
leave it unattended.
Setting the Parking Brake
A
Releasing the Parking Brake
A

Operating the Throttle

The throttle control can be moved between Fast and Slow
positions (Figure 13).
Always use the fast position when turning on the mower deck
with the blade control switch (PTO).

Operating the Choke

Use the choke to start a cold engine.
B
Figure 11
B
Figure 12
G008946
Figure 13
1. If the engine is cold, use the choke to start the engine.
2. Pull up on the choke knob to engage the choke before
using the ignition switch
3. Push down on the choke to disengage the choke after
the engine has started
g027638
1. On
g027639

Operating the Ignition Switch

1. Turn the ignition key to the Start position
When the engines starts, release the key.
Note: Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
2. Turn the ignition key to stop to stop the engine.
17
(Figure
(Figure
1
2
Figure 14
2. Off
Figure 15
14).
14).
G008959
(Figure 15).
G008947