Copying From The Bypass Tray - Ricoh Aficio 650 Operating Instructions Manual

Copying From The Bypass Tray

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, post cards, and copy paper that cannot be set in the paper tray.
Limitation
When copying several originals using the bypass tray, copies are delivered
face-up ("Face Up Exit") and in reverse order by default.
Only change the setting to "Face Down Exit" if you are using high quality
copy paper with a weight of 52 – 105 g/m
Selection in Bypass Mode" in ⇒ P.212 "Count Manager".
If you try and have copies delivered face-down when copying onto other
types of paper or adhesive labels, a paper jam may occur.
Note
If you select "Face Down Exit" when only one original is set on the exposure
glass or in the document feeder, you must set the "Face-Up/Down Selection
in Bypass Mode" setting to "Face Down Exit" and the "Face Up/Down Selec-
tion in Platen Mode" setting to "Face Down Exit" with the User Tools. See
"Face-Up/Down Selection in Bypass Mode" in ⇒ P.212 "Count Manager" and
"Face-Up/Down Selection in Platen Mode" in ⇒ P.210 "Input Output".
The machine can automatically detect the following sizes as standard size
copy papers:
Metric version
A3L, A4L, A5L, 8
A3L, 11" × 17"L, 8
Inch version
If you do not use the standard size copy paper, you should input vertical and
horizontal dimensions. The sizes that you can input are as follows:
Metric version • Vertical: 100 – 300 mm
• Horizontal: 148 – 432 mm
Inch version • Vertical: 4.0" – 11.7"
• Horizontal: 6.0" – 17.0"
To make copies onto OHP transparencies or thick paper exceeding 104.7 g/
, 28 lb, specify the paper type in ⇒ P.62 "When copying onto OHP transpar-
2
m
encies or thick paper".
Reference
For details about paper capacity of the bypass tray, see ⇒ P.21 "Copy Paper".
Copying From The Bypass Tray
2
(14 – 28 lb). See "Face-up/Down
" × 13"L
1
/
2
" × 14"L, 8 " × 11"L, 5
1 1
/ /
2 2
" × 8
" L
1 1
/ /
2 2
59
2