COPYING
Note
In this mode, the machine selects the reproduction ratio automatically. This
reproduction ratio depends on the copy paper sizes and the number of origi-
nals.
The machine uses ratios in the following range:
• Metric version: 32 – 400 %
2
• Inch version: 32 – 400 %
If the calculated ratio is under the minimum ratio, it is corrected within the
range of the ratio automatically. However, with some ratios, parts of the im-
age might not be copied or blank margins appear on copies.
Separation line between originals can be printed with the user tools. See
"Combine Separation Line" in ⇒ P.206 "Page Format
Even if the direction of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies properly.
When making copies in Combine mode, the circumference of each original
can be automatically erased by 3 mm, 0.1". See "Combine Original Shadow
Erase" in ⇒ P.205 "Page Format
If the number of originals placed is less than the number specified for com-
bining, pressing the {#} key allows the last page(s) to be copied blank as
shown in the illustration. You can also change the system setting to automat-
ically avoid such copying. See "Combine: Auto Eject" in ⇒ P.210 "Input Out-
put".
1
Direction of the originals and arrangement of combined images
96
1
2
1
2
3
3
2
/
".
2
/
".
2