Basic Procedure
A
Make sure that the machine is in Copy mode.
B
When the machine is set for user code, enter the user code with the
{ { { { Number} } } } keys and then press the { { { { #} } } } key.
Reference
See ⇒ P.68 "User Codes".
C
Make sure that there are no previous settings remaining.
Note
To clear settings, press the {Clear Modes/Energy Saver} key.
D
Set your originals.
Reference
See ⇒ P.29 "Setting Originals".
E
Set your desired settings.
F
Enter the number of copies required with the { { { { Number} } } } keys.
Enter
Sample Copy
Start
Clear/Stop
TSPS020N
2. COPYING
27