Backlight Compensation Function; Fade In/Fade Out Function - Panasonic DVD e.cam VDR VDR-D210 Operating Instructions Manual

To eliminate washed out images, use this
mode.
3 Video light off
1
2
3
≥ The subject should be within 1.5 m (5 feet) of
the unit.
≥ Using the video light reduces battery time.
≥ Set the video light to off when not in use.
≥ Do not look directly into the light.
≥ If the video light is used with a conversion lens
attached, a slight vignetting (darkening around
edges) effect occurs on the screen.
≥ Using the MagicPix function at the same time
will make conditions even brighter.
≥ The video light enables brightening of the
images taken in a dimly-lit place. We also
recommend using it in a bright place to obtain
high quality images.
≥ If you turn off the power or operate the mode
dial, the video light is turned off.
Backlight compensation
function
This is for protecting a backlit subject
from being darkened.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
Use this function when the light is emanating
from behind the subject and the subject appears
dark.
¬ Rotate the mode dial to select
.
r
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2
Move the joystick up to select
[ª].
The image on the screen will become brighter.
To return to normal recording
Select [ª] again.
≥ If you turn off the power or operate the mode
dial, the backlight compensation function is
canceled.

Fade in/fade out function

Fade in:
Fade out: The image and audio gradually
¬ Rotate the mode dial to select
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
or
1/2 NEXT 1/2 1/2 NEXT NEXT
1/2 NEXT 1/2 1/2 NEXT NEXT
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
The image and audio gradually
appear.
disappear.
1/2 NEXT 1/2 1/2 NEXT NEXT
Recording
.
55
LSQT1145