Service, Maintenance And Care; Disposal - Taski vento 8S Manual

If the suction performance is inadequate, change the dust
bag and service the filter
Notice:
Wait for a short period to allow the dust to
settle before removing the dust bag
2
• Press down the opening shackle (1)
1
and lift off the vacuum lid (2).
• Take out the basket. Check whether
the filter cloth (basket) is dirty and
clean it if required.
• Remove the dust bag from the intake and dispose of the
bag according to your national regulations.
• Insert the dust bag as described in the pictogram.
Slightly soiled filter cloth.
• Brush off the dirt or vacuum it (using another vacuum
cleaner).
Heavily soiled filter cloth.
• Wash the filter cloth in the washing machine (max. 30°C/
86°F).
• Place the moist filter cloth on the basket (to allow it to take
the correct shape) and let it air-dry .
The filter cloth must not be dried in a tumble dryer!
Attention:
The machine may only be operated with a
dry and functional filter cloth!
• Replace the basket.
The top arrow must point in the direction of the intake.
Heavily soiled filter disc
• Replace the filter disc with a new one.
The blue side of the filter disc must be
visible.
Attention:
The machine may only be operated with
the filter disc inserted!
• Insert the studs of the vacuum lid (2)
in the provided guide on the tank (1).
2 Press down the vacuum lid until the
1
opening shackle clicks in place.
Maintenance of the optional filters
Heavily soiled exhaust filter
• Remove the exhaust filter and insert a
new one.
Heavily soiled HEPA filter
• Only vento 15S: Remove and dispose
of the HEPA filter according to your
national regulations.
HEPA filters cannot be cleaned!

Service, maintenance and care

The maintenance of the machine is the prerequisite for
impeccable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will
expire.
Legend:
 = whenever cleaning is completed,  = every week
Activity
Check/replace dust bag
Clean/replace filter cloth
Check/replace filter disc
Check/replace exhaust filter
Check/replace HEPA filter
Clean the machine with a moist cloth
Service intervals
TASKI machines are high-quality machines, which have been
checked for safety in the factory and by authorised inspectors.
Electrical and mechanical parts are subject to wear and
ageing after a longer period of use.
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 500 working hours
or at least once a year.
In case of extraordinary use and/or insufficient
maintenance, shorter intervals are required.
Service centre
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of
malfunction.
The required data are provided on the nameplate of your
machine. The address of your closest Diversey service
partner is provided on the last page of this manual.

Disposal

Notice:
After withdrawal from service, the machine
and accessory parts must be adequately
disposed of in compliance with the nation-
al regulations. Please contact your Di-
versey service partner for help.
●
●
34
●
34
●
34
●
34
●
35