Service, Maintenance And Care; Malfunctions - Taski vento 15 Translation Of The Original Instructions Of Use

If the suction perfromance is inadequate, replace the dust bag and service
the filter as described below:
Wait a moment for dust to settle before removing the dust bag.
• Press down the fastener catch (1) and lift off the
2
1 vacuum lid (2).
• Take out the basket, check if the cloth filter is
dirty (basket), clean if necessary.
• Remove the dust bag from the hose connector and dispose of it according
to your national regulations.
• Insert the dust bag as described in the pictogram on the dust bag.
Lightly soiled cloth filter.
• Brush off or using another vacuum cleaner, suck off the dirt.
Heavily soiled cloth filter.
• Wash the cloth filter in the washing machine (max. 30° C/86° F).
• Rest the damp cloth filter on the basket (so it adopts the right shape) and
leave to air dry.
The cloth filter may not be put in the tumble drier!
Caution:
The machine may only be operated with a dry and functional filter
cloth!
• Insert the basket, the arrow at the top must point towards the hose
connector.
Heavy soiling of the filter disc
• Turn the vacuum lid round, and replace the filter
disc with a new one.
The blue side of the filter disc must be visible.
Caution:
The machine may only be operated with the filter disc fitted!
• Place the ridge of the vacuum lid (2) into the
guide provided on the canister (1), then press
down until you hear the fastener catch click into
2
place.
1
Servicing the optional filter
Heavily soiled exhaust filter
• Remove the exhaust filter and fit a new one.
Heavily soiled HEPA filter
• Vento 15 only: Remove the HEPA filter and
dispose it in accordance with the national
regulations.
HEPA filters cannot be cleaned!
12

Service, maintenance and care

Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
The machines maintenance is a pre-condition for trouble-free running and an
extended life.
Symbols:
 = after use,  = every week
Activity
Checking/replacing the dust bag
Cleaning/replacing the filter cloth
Checking/replacing the filter disc
Checking/replacing the exhaust filter
Checking/replacing the HEPA filter
Clean the machine with a damp cloth
Service intervals
TASKI machines are built to the highest quality standards. This is supported by
internationally recognised quality control procedures. Electrical and mechanical
parts are subject to wear or aging if used for long periods of time.
• In order to maintain operational reliability and availability for use, the service
must be carried out after 500 working hours or at least once a year.
Under rough or extreme working conditions and / or insufficient maintenance,
shorter periods are necessary.
Service centre
Should you contact us due to a malfunction or for placing an order, please
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the
address of your nearest TASKI partner can be found on the last page of this
manual.

Malfunctions

Malfunction Possible causes
ON/OFF switch (ON/OFF)
switched off
No power supply
Plug not connected to the
Machine does not
power socket on the
run
machine
Power supply cord defect.
ON/OFF switch defective
Motor defect
Dust bag full (safety valve
has been tripped to
prevent the suction motor
overheating)
Cloth filter soiled
Poor vacuum
Filter disc dirty
performance
Suction hose or sqeegee
nozzle blocked
HEPA filter dirty (optional:
only on vento 15)
Exhaust filter (optional)
Build-up of
Accumulation of moisture
odours
 
page
11
11
11
11
Troubleshooting page
• Switch the ON/
OFF switch on
11
• Plug the power
supply cord into
the mains socket.
• Plug in
11
• Replace the
power supply cord
• Call for technical
assistance
• Call for technical
assistance
• Replace
11
• Clean or replace
11
cloth filter
• Relace the filter
11
disc
• Remove the
blockage
• Replace
12
• Replace 11
• replace the dust
bag