Panasonic CF-73 Series Reference Manual page 16

Touchscreen
NOTE
To right-click:
Make the setting as follows.
1
Display [Touch Panel Property] screen.
Windows XP
Select [Start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel].
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Touch Panel].
2
In [Button], add the check mark for [The right-button function will be ...], and
select a key from [Combination keys].
3
Select [OK].
You can right-click by selecting an object with the key you selected in [Combination
keys].
CAUTION
When the internal LCD is used alone or with an external display simultaneously, the
touchscreen function will not work properly when the area of either display is set
larger than default setting of the display resolution.
If a change is made to the display resolution, or the cursor can not be pointed
correctly with the stylus, be sure to perform [Calibration]. (
Even when only an external display is in use, the cursor will move on the external
display if the surface of the internal LCD is touched when the touchscreen driver is
active. Therefore, do not touch the internal LCD when only an external display is in
use.
The touchscreen function can not be used when using the full screen in [Command
Prompt].
NOTE
Select to view [Important Tips] for using the touchscreen. You can also view
[Important Tips] using the following procedures.
Windows XP
Select [Important Tips] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals].
16
page 17)