Panasonic CF-73 Series Reference Manual page 28

Security Measures
When you do not want the data on the hard disk to be read/
written
To disable the User Password
Press only Enter.
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
CAUTION
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, log on with the Supervisor Password, or ask a person who
knows the Supervisor Password.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
NOTE
Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on Shift or Ctrl.
When you do not want the User Password enabled or changed without permission:
1
Run the Setup Utility and enter the Supervisor Password.
2
Go to [Security] menu. Using
press Enter.
3
Using either
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the
hard disk when the hard disk is inserted in a different computer, since a password is also set
for the hard disk. When the hard disk is returned to the original computer, you can read and
write data as before. In this case, however, make the settings in the Setup Utility exactly the
Enter
.
and , select [User Password Protection] and
, select [Protected] and press Enter.
or
28
Enter
.