Panasonic CF-73 Series Reference Manual page 68

LAN
Wake up from LAN
Enabling the Wake up from LAN Function
NOTE
If you are unable to connect to the network (when the indicator of your HUB unit does
not light):
1
Display [Device Manager] screen.
Windows XP
Select [Device Manager] in [Start] - [Control Panel] - [Performance and
Maintenance] - [System] - [Hardware].
Windows 2000
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware].
2
Select the network adaptor you are using from [Network adapters].
3
Select [Advanced].
4
Confirm the settings of each item.
This is a function of the internal LAN to automatically power the computer on from a network
server when the computer is in the standby or hibernation mode. To use this function, it is
necessary to have a network environment that accommodates Wake up from LAN.
Windows XP
1
Select [Device Manager] in [Start] - [Control Panel] - [Performance and
Maintenance] - [System] - [Hardware].
2
Select the internal network adaptor from [Network adapters].
3
Select [Power Management], add the check mark for [Allow the computer to turn
off this device to save power] and [Allow this device to bring the computer out of
standby], then select [OK].
Windows 2000
1
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware].
2
Select the internal network adaptor from [Network adapters].
68