Panasonic CF-73 Series Reference Manual page 23

Standby/Hibernation Functions
Windows 2000
[Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced]
*1 Windows 2000
[Standby]
Entering the standby or hibernation mode
1
Press the power switch (A); at the beep sound, release your finger.
The computer will enter either the standby or hibernation mode, depending on the
setting.
CAUTION
After releasing your finger from the power switch, do not touch the power switch until
the power indicator goes off or blinks.
At the beep sound, release your finger from the power switch. If you continue to press
the power switch and hold it for more than four seconds, the computer will emit a
second beep then power off. Data not previously saved will be lost.
Windows XP
Even when [When I press the power button on my computer] is set to [Shut down] with
[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced], if you press the power switch for more than four seconds and do not
release it, a second beep will sound and the power will be turned off forcibly. Data not
previously saved will be lost.
Windows 2000
Even when [When I press the power button on my computer] is set to [Power Off] with
[Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced], if you press the
power switch for more than four seconds and do not release it, a second beep will
sound and the power will be turned off forcibly. Data not previously saved will be lost.
23