CD Drive
About Discs
Software Preparation (first time only)
Cleaning
We recommend cleaning the drive with an air puffer used for camera lenses.
(Do not use any spray-type of lens cleaning products.)
Do not use any discs that have become deformed, warped, or are not completely round.
Depending on the condition (record quality, a crack, dirt, modification, copy protection,
etc.) of a disc, it may not be possible to be read it correctly.
Windows 2000
Reading DVD-RAM discs on the CD drive
• Only data written on a disc formatted using UDF 1.5 can be treated as a file by Windows
Explorer.
• Any disc in the UDF 2.0 format recorded by a DVD recorder can be played using the
"WinDVD" program. (⇒Operating Instructions "WinDVD")
The following setting has been made at the time of purchase.
Windows XP
Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Control Panel] -
[Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [IDE ATA/ATAPI
controllers] - [Secondary IDE Channel] - [Advanced Settings] - [Device 0].
Windows 2000
Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Settings] - [Control Panel]
- [System] - [Hardware] - [Device Manager] - [IDE ATA/ATAPI controllers] - [Secondary IDE
Channel] - [Advanced Settings] - [Device 0].
44