A2-3. PIO_GetConfigAddressSpace
Description:
This function can be used to save the resource information all PIO/PISO
cards installed in the system. The application program can then control
all the functions of the PIO/PISO series card directly.
Syntax:
WORD PIO_GetConfigAddressSpace(wBoardNo,*wBase,*wIrq,
wSubVendor, *wSubDevice, *wSubAux, *wSlotBus, *wSlotDevice)
Parameters:
wBoardNo
wBase
wIrq
wSubVendor
wSubDevice
wSubAux
wSlotBus
wSlotDevice
Returns:
Refer to "Table A.1".
A2-4.
PIO_GetDriverVersion
Description:
This function is used to obtain the version number of PIODIO driver.
Syntax:
WORD PIO_GetDriverVersion(WORD *wDriverVersion)
Parameters:
wDriverVersion
Returns:
Refer to "Table A.1".
PIO/PEX-D24/D56 Series User Manual (Ver.3.0, Feb. 2011, PMH-005-30 )
[Input]
The board number
The base address of the board
[Output]
The IRQ number that the board using
[Output]
Sub Vendor ID
[Output]
Sub Device ID
[Output]
Sub Aux ID
[Output]
Slot Bus number
[Output]
Slot Device ID
[Output]
[Output]
wDriverVersion address
41