Tc/Ub Screen - Panasonic AJ-HDC20A P Operating Instructions Manual

Setting menu screens

TC/UB screen

The time code and user's bit settings are performed on
this screen.
Variable
Item
range display
TC MODE DF USER
NDF ENG
UB MODE USER USER
DATE ENG
TIME
EXT
TCG
TCG SET HOLD ON USER
OFF ENG
The underlining in the variable range column indicates the setting in the preset mode.
(VTR MAIN MENU)
VF
Remarks
For setting the time code
to the DF or NDF mode.
DF : The time code is set
to the drop frame
mode.
NDF : The time code is set
to the non-drop
frame mode.
For setting what is to be
written as the user's bit in
the LTC area.
USER : User setting (fixed).
DATE : Real time value for
year/month/day/hou
rs.
TIME : Real time value for
hours/minutes/seco
nds.
EXT : The UBG value is
slave-locked when
a TC signal is
supplied from an
external source.
(The user setting is
used when no
external input is
supplied.)
TCG : Time code
generator value
<Note>
Set the time on the
TIME/DATE menu screen
when using the UB MODE
item with real-time
operation.
For selecting the operation
of TCG when the TCG
SET 5 power OFF 5
power ON 5 REC
operations are performed.
ON : The TCG setting is
stored when the
power is turned off,
and is not
regenerated.
OFF : The TCG setting is
not stored when the
power is turned off,
but is regenerated.
Variable
Item
range
FIRST REC TC REGEN
PRESET
P. OFF LCD ON
DISPLAY OFF
TC OUT TCG
TCG/TCR
<Note>
When USER is set for the UB MODE item, it is not possible to set
EXT for the VITC UB MODE item.
Similarly, it is not possible to set EXT for the UB MODE item when
USER has been set for the VITC UB MODE item.
100
VF
Remarks
display
USER For setting the TC REGEN
ENG mode when recording is
started.
REGEN:
The time code set on the
tape is regenerated.
PRESET:
The time code set on the
tape is not regenerated.
However, it is forcibly
regenerated when the
unit is transferred from
the rec-pause mode to
the recording mode.
USER For setting whether the
ENG LCD display is to appear
when the power is OFF.
ON : The LCD display
appears even when
the power is OFF.
OFF : The LCD display
does not appear
when the power is
OFF.
The power-saving
mode is established.
USER For selecting the time
ENG code which is to be output
to the time code output
connector.
TCG:
The time code generated
by the time code
generator is output at all
times.
TCG/TCR:
The time code generated
by the time code
generator is output in the
E-E mode; the time code
reader value is output in
the V-V mode.