Parts And Their Functions; Power Supply Section; Accessory Mounting Section - Panasonic AJ-HDC20A P Operating Instructions Manual

Parts and their functions

Power supply section

4
1 Battery mount
This is for attaching the Anton/Bauer battery pack.
2 DC IN (external power input) socket (XLR, 4P)
When operating this unit using an AC power
source, this socket is connected to the model AJ-
B75 AC adapter (optional accessory).
3 BREAKER button
To protect the equipment, the circuit breaker is
tripped when an overcurrent flows inside the unit,
and the power is automatically turned off. Push this
button to the pushed-in position after performing
internal inspections and adjustments. If there is no
problem, the power will be turned back on.
4 POWER switch
ON : Set here to turn on the power.
OFF : Set here to turn off the power.
3

Accessory mounting section

1
5
6
3
4
1
6
8
2
7
1 Hooks for attaching shoulder strap
Attach the ends of the accessory shoulder strap to
these hooks.
2 Light shoe
Use this to attach the video light, etc.
3 Lens mount (Bayonet type)
Use this to attach the lens.
4 Lever for securing lens
Insert the lens into the lens mount 3, and turn the
lens mount ring using this lever to secure the lens.
5 Lens mount cap
To remove the cap, push the lever for securing the
lens 4 up.
Keep the cap in place while the lens is not
attached.
6 Lens cable/microphone cable clamp
This clamp is for anchoring the lens cable or
microphone cable.
7 Tripod mount
Mount the tripod attachment (SHAN-TM700),
available as an optional accessory, when the unit is
to be anchored to the tripod.
8 LENS terminal (12-pin)
The connecting cable of the lens is connected here.
For details concerning the lenses that can be used,
consult your dealer.
9 Shoulder pad
This pad can be adjusted to facilitate operation
when the unit is operated on the user's shoulder.
The pad position can be moved forward or
backward when the two securing screws are
loosened.
9
2
1
9