Vf Display Screen; Vf Marker Screen - Panasonic AJ-HDC20A P Operating Instructions Manual

Setting menu screens

VF DISPLAY screen

The information to be displayed inside the viewfinder
is set on this screen.
Variable
Item
range display
DISP NORMAL USER
CONDITION HOLD ENG
DISP MODE 1 USER
2 ENG
3
VF OUT Y USER
NAM ENG
R
G
B
VF DTL 0 USER
: ENG
4
ZEBRA1 50% USER
DETECT : ENG
70%
:
110%
ZEBRA2 50% USER
DETECT : ENG
85%
:
110%
ZEBRA2 ON USER
OFF ENG
SPOT
The underlining in the variable range column indicates the setting in the preset mode.
(CAM MAIN MENU 2)
VF
Remarks
NORMAL:
The statuses are
displayed at all times.
HOLD:
The statuses are
displayed when MODE
CHECK SW is ON.
Display
Change
1 2
FILTER
t t t t ± ±
GAIN
t t t t ± ±
AWB
t t t t ± ±
AUTO KNEE SW
t t ± ± ± ±
SHUTTER
t t ± ± ± ±
ABB STATUS
t t ± ± ± ±
AWB STATUS
t t ± ± ± ±
For selecting VF OUT.
NAM (N Additive Mix):
The signal with the highest
level among the R, G and
B signals is output.
For selecting VF DTL.
The detail of the signals
for VF is further boosted.
At the "0" setting, the
detail is the same as the
unit's.
For setting the ZEBRA1
detection level (IRE level).
For setting the ZEBRA2
detection level (IRE level).
For setting ZEBRA2 to ON
or OFF and selecting
SPOT.
<Note>
When used at the "SPOT"
setting, ensure that the
ZEBRA2 DETECT value is
set higher than the
ZEBRA1 DETECT value.
If the ZEBRA2 DETECT
value is lower than the
ZEBRA1 DETECT value,
the ZEBRA display will not
appear.
Variable
Item
range
LOW LIGHT LVL OFF
20%
25%
:
40%
45%
3

VF MARKER screen

The information to be displayed inside the viewfinder
is set on this screen.
Variable
Item
range
SAFETY ZONE OFF
:
3
:
12
CENTER MARK ON
OFF
4:3 MARK ON
OFF
4:3 FRAME LVL 0
:
15
84
VF
Remarks
display
USER For selecting the light level
ENG for the LOW LIGHT
display when the amount
of light entering the
camera is too low.
VF
Remarks
display
USER For selecting the safety
ENG zone display.
1 : 80% and 90% corner
display
2 : 80% corner display
3 : 90% corner display
4 : 80% and 90% box
display
5 : 80% box display
6 : 90% box display
7 : 80% and 90% corner
display in 4:3 mode
8 : 80% corner display in
4:3 mode
9 : 90% corner display in
4:3 mode
10 : 80% and 90% box
display in 4:3 mode
11 : 80% box display in
4:3 mode
12 : 90% box display in
4:3 mode
USER For setting the center
ENG marker display to ON or
OFF.
USER For setting the marker
ENG displays to ON or OFF in
the 4:3 mode.
USER For setting the VF level
ENG outside the markers in the
4:3 mode.