Using The Sony Np-1 Battery Pack; Using The Sony Bp-90 Battery Pack - Panasonic AJ-HDC20A P Operating Instructions Manual

Power supply

Using the Sony NP-1 battery pack

1
Detach the battery mount.
See page 22.
2
Attach the accessory battery mounting connector.
3
Attach the Sony battery holder. As shown in the
figure, attach the battery case with the cover
detached and then the detached cover.
1 Tighten the mounting screws.
2 Tighten the power contact screws.
3 Insert the top of the detached cover in the
direction shown by the arrows.
4 Align the holes in the bottom of the cover (metal
part) with the holes at the bottom of the case,
and use the battery holder screws to attach the
case to the battery mounting connector.
<Note>
When mounting the battery holder, take care not to
pinch the connecting cord.
1
3
4
2

Using the Sony BP-90 battery pack

1
Attach the accessory battery mounting connector.
2
Attach the battery case for the BP-90.
1. Tighten the mounting screws.
2. Tighten the power contact screws.
3. Insert the top of the detached cover in the
direction shown by the arrows.
4. Align the holes in the bottom of the cover (metal
part) with the holes at the bottom of the case,
and use the screws to attach the case.
23