Recommended Adjustments - Grizzly G0771 Owner's Manual

5. Remove switch disabling key, as shown in
Figure 40.
Figure 40. Removing switch key from paddle
switch.
6.
Try to start machine with paddle switch.
—If machine does not start, switch disabling
feature is working as designed.
—If machine starts, immediately stop
machine. The switch disabling feature is
not working correctly. This safety feature
must work properly before proceeding with
regular operations. Call Tech Support for
help.
Model G0771 (Mfd. Since 8/15)
Recommended
Adjustments
For your convenience, the adjustments listed
below have been performed at the factory and no
further setup is required to operate this machine.
However, because of the many variables involved
with shipping, we recommend that you verify the
following adjustments to ensure that this saw cuts
safely and accurately.
Step-by-step instructions for these adjustments
can be found in SECTION 7: SERVICE.
Adjustments that should be verified:
1. Blade Tilt Stop Accuracy (Page 59).
2. Miter Slot Parallel to Blade (Page 61).
3. Table/Dado Insert Adjustment (Page 66).
-25-