Client + Ap Mode - Tenda AP5V User Manual

❻
Make sure that the IP address is on a different network segment from that of the ISP hotspot and then click
Next.
❼
Note down your SSID (WiFi name) and WiFi password on this page and click Save to apply your settings.
Wait until the device restarts successfully.

Client + AP Mode

This mode is very similar to universal repeater mode, in which the AP can extend the WiFi range of the uplink
ADSL modem or router by relaying wireless signal. Broadly, the biggest difference between these two modes is
that you can customize your local WiFi name and network security settings in client + AP mode.
21