Appendix; A With Poe Setup; B Connect To Your Wifi - Tenda AP5V User Manual

Appendix

A With PoE Setup

❶
Connect your computer to the LAN port of the injector with the included Ethernet cable.
❷
Connect the PoE/LAN2 port of your AP to the PoE port of the injector with another Ethernet cable.
❸
Plug the included power adapter into the DC jack of the injector, and the other end to a nearby power outlet.
Note:
The PoE injector supports a maximum cable (Cat5e or better) length of up to 35 meters (115 feet or so).

B Connect to Your WiFi

Tip
1. The PC you use must have an installed wireless network adapter.
2. The device's SSID is "Tenda_XXXXXX" by default (where "XXXXXX" is the last six characters of its MAC
address). You can find the MAC address and SSID on the label attached to the device's bottom).
3. The first time you connect to your WiFi to configure the AP, you need to set your PC to Use the following IP
address. For details, see Step 2: Configure IP on Your PC
re-connect to your WiFi and set your PC to Obtain an IP address automatically for Internet access.
. After finishing configuring the AP, you need to
48