iPF670
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
Caution
•
When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters
are not locked poses a risk of injury or damage to the location site.
•
Before moving the assembled stand, lift the support
rod to the position shown (a) and unlock all four cas-
ters. Moving the stand with the support rod lowered or
the casters locked may cause injury or damage the
area of installation or basket cloth.
•
The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
•
Note
The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look differ-
ent from the appearance of your printer in some cases.
•
The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be
included as a standard accessory in some sales regions and periods.
Install the printer
1
Install the printer on a table or other flat surface.
If you will use the printer on an optional Stand, assemble
the Stand before mounting the printer on it, and then se-
cure it with the Main Unit Securing Bolts.
User's Guide
Downloaded from ManualsPrinter.com Manuals
Reinstalling the Printer
a
O F F
523