Menu Structure - Canon iPF670 User Manual

Menu Structure

Menu Structure
Menu Structure
The menu structure is shown categorized by tab. The * on the right side of an item indicates the default value.
The printer menu is classified into regular menu items available when no print job is in progress and menu during
printing items only available while printing is in progress. see "Printer Menu Operations."
Regular menu
Paper Menu
Ink Menu
Job Menu
Set./Adj. Menu
*1: Only displayed in the menu during printing. Not displayed in the regular menu.
For instructions on menu operations, see "Menu Operations."
For details on menu items, see "Menu Settings."
Paper Menu
The Paper Menu is not displayed during printing.
First Level
Load Paper
Eject Paper
Chg. Paper Type( *1 )
Chg. Paper Size
ManageRemainRoll
Paper Details
410
Paper Details
Keep Paper Type
Downloaded from ManualsPrinter.com Manuals
Not displayed
The same
The same
A limited Set./Adj. Menu containing the following items is displayed.
•
Adj. Fine Feed( *1 )
•
Printer Info
P.416
➔
Second Level
Roll Paper | Cut Sheet
Roll Paper (The paper type is displayed here.) ( *1 )
Cut Sheet (The paper type is displayed here.) ( *1 )
Sheet Size (The size of paper is displayed here.) ( *2 )
CustomPaperSize
Roll Length( *3 ) (Set the length)
Roll Width( *4 ) (Set the width)
Off* | On
(The paper type is dis- Head Height
played here.) ( *1 )
Skew Check Lv.
Cutting Mode( *6 )
Cut Speed
Trim Edge First
CutDustReduct.
VacuumStrngth
Scan Wait Time
Roll DryingTime
NearEnd RollMrgn
NearEnd Sht Mrgn
BordlessOversize
Width Detection
Return Defaults
Off* | On
Menu during printing
Ink Menu as normal is displayed.
Job Menu as normal is displayed.
P.407
➔
Third Level Fourth Level
(Set the length and width)
Automatic* | Highest | High | Standard | Low |
Lowest | Super Low
High Accuracy | Standard* | Loose | Off
Automatic | Eject | Manual
Fast | Standard | Slow
Automatic | Off | On (Preset Len) | On(Input
Length) | Manual
Off | On
Automatic* | Strongest | Strong | Standard | Weak
| Weakest
Dry time
Area( *5 )
Off | 30 sec. | 1 min. | 3 min. | 5 min. | 10 min. | 30
min. | 60 min.
3mm | 20mm
3mm | 20mm
Standard* | Little
Off | On*
iPF670
P.406
➔
Fifth Level
Off* | 1 sec. | 3 sec. |
5 sec. | 7 sec. | 9 sec.
Entire area* | Leading
edge
User's Guide