Canon iPF670 User Manual page 482

Manual Adjustment to Straighten Lines and Colors
•
We recommend using the type of paper you use most often for adjustment.
Note
Items to Prepare
When Using Rolls
When Using Sheets
Perform adjustment as follows.
1
Load paper.
• Attaching the Roll Holder to Rolls
•
Loading Rolls in the Printer
• Loading Sheets in the Printer
Important
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Settings/Adj. tab (
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5
Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.
6
Press ▲ or ▼ to select Manual, and then press the OK button.
A test pattern is printed for adjustment.
Note
7
Press ▲ or ▼ to select D, and then press the OK button.
8
Press ▲ or ▼ to select D-1, and then press the OK button.
482
Downloaded from ManualsPrinter.com Manuals
An unused roll at least 254.0 mm (10.00 in) wide
Two sheets of unused paper, A4/Letter size (or one sheet when using A2)
P.322
➔
P.340
➔
•
Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment
cannot be completed correctly unless the loaded paper matches the settings.
).
•
If the Tab Selection screen is not displayed, press the Menu button.
•
Manual may be unavailable in some cases, even if it is displayed in the menu.
If so, execute Standard once.
(See "Automatic Adjustment to Straighten Lines and Colors.")
•
If you printed on cut sheets, follow the instructions on the Display Screen and use another sheet of the
same type of paper.
P.320
➔
P.480
➔
iPF670
User's Guide