CYBEX Cloud Q Instruction Manual page 14

m
k
l
b
14
q
n
NOTE! The infant car seat must not be used in the
reclining position in a vehicle. In order to ensure this, the
belt guide is automatically locked as soon as the seat is
l
put into the reclining position.
• Place the lap belt (k) into blue belt guides (m) on both
sides of the infant car seat.
• Tighten lap belt (k) by pulling on diagonal belt (l) in the
direction of the front of the vehicle.
• Pull diagonal belt (l) behind the head end of the infant
car seat.
NOTE! Do not twist the vehicle seatbelt while doing this.
• Route diagonal belt (l) through the rear blue belt guide
(n) and ensure the belt is placed above the L.S.P.
• Tighten diagonal belt (l).
NOTE! Diagonal belt (l) must be routed through rear, blue
a
belt guide (n) and above the unfolded telescopic Linear
Side-impact Protector (L.S.P.).
• Now swing the carrying handle (a) with both buttons (b)
pressed, into the vehicle position A (see page 8)
WARNING! It may be that buckle part (q) of the
car seatbelt is too long so that is reaches the blue
belt guides of the infant car seat. This means that
the infant car seat cannot be fastened tightly. If this
is the case, choose another seat in the car for the
infant car seat.