Labels (G0453W & G0453Zw) - Grizzly G0453W Owner's Manual

Labels (G0453W & G0453ZW)
MODEL G0453ZW
15" SPIRAL CUTTERHEAD
PLANER
WARNING!
Specifications
Motor: 3 HP, 240V, Single-Phase, 60 Hz, 12A
To reduce the risk of serious injury when using this machine:
Cutterhead: Spiral w/Indexable Inserts
1. Read and understand owner's manual before operating.
Replacement Inserts: H7319 (10 Pack)
2. Always wear approved safety glasses and respirator.
Number of Inserts: 72 3. Disconnect power before changing inserts, removing machine
Cutterhead Speed: 5000 RPM components, or doing maintenance, service, or adjustments.
601
Cutterhead Diameter: 3" 4. Only plug power cord into a grounded outlet.
Feed Rates: 16 & 20 FPM 5. Do not wear loose clothing, gloves, jewelry, or other items that
Maximum Depth of Cut Per Pass: 1/8" can get entangled. Tie back long hair and roll up sleeves.
Minimum Stock Thickness: 3/16" 6. Ensure machine is correctly setup before starting.
Minimum Stock Length: 6" 7. Never cut deeper than 1/8" on a single pass.
Maximum Cutting Width: 15"
8. Never plane material smaller than 8" long, 3/4" wide, or 3/16" thick.
Maximum Cutting Height: 8"
9. Do not allow hands or clothing to get pulled into cutting area
Weight: 525 lbs.
while feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Inserts are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area during machine operation.
Date
14. Do not operate when tired or under influence of drugs or alcohol.
Labels marked *** have changed since last sending.
15. Do not expose to rain or use in wet locations.
S/N
16. Prevent unauthorized use by children or untrained users;
Mfd. for Grizzly in China restrict access or disable machine when unattended.
Grizzly Planer
• Scale= 1:1
(unless otherwise noted)
Generic Labels
• Labels MUST be made of
(12.24.15) chemical-resistant material
WARNING!
Labels marked *** have changed since last sending.
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
615 using this machine.
WARNING!
EYE/EAR/LUNG To reduce risk of death
or serious injury, read
INJURY HAZARD!
manual BEFORE using
Always wear safety
machine.
glasses, ear protection,
To get a new manual, call
and respirator when (800) 523-4777 or go to
using this machine.
www.grizzly.com.
To reduce the risk of serious personal
50 x 84mm 50 x 84mm 50 x 84mm
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
67 x 32mm 36 x 32mm
NOTICE
Add SAE 30 oil every 24 hours of operation.
121 x 13mm
G0453W, G0453ZW,
G0454W, G0454ZW
GEARBOX MUST Machine Labels B
BE FILLED WITH OIL!
(6/12/15)
Grizzly Planer
***
Only shift gearbox when
Generic Labels
REFER TO
OWNER'S MANUAL
*** (12.24.15)
STOP
Requires 80W-90W
or Equivalent
Labels marked *** have changed since last sending.
Gear Oil.
20 FPM
613
102 x 102mm
ANSI COLOR CODES FOR SAFETY LABELS
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. WARNING!
artwork changes are required, contact us immediately at manuals@grizzly.com.
EYE/EAR/LUNG To reduce risk of death
or serious injury, read
INJURY HAZARD!
manual BEFORE using
Always wear safety machine.
glasses, ear protection,
To get a new manual, call
and respirator when
(800) 523-4777 or go to
using this machine.
www.grizzly.com.
50 x 84mm
612
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
67 x 32mm
NOTICE
Add SAE 30 oil every 24 hours of operation.
121 x 13mm
Grizzly Planer
Generic Labels
GEARBOX MUST
BE FILLED WITH OIL!
(12.24.15)
Labels marked *** have changed since last sending.
***
REFER TO
OWNER'S MANUAL
Requires 80W-90W
or Equivalent
Gear Oil.
WARNING!
102 x 102mm
EYE/EAR/LUNG To reduce risk of death
or serious injury, read
INJURY HAZARD!
manual BEFORE using
ANSI COLOR CODES FOR SAFETY LABELS
Always wear safety machine.
glasses, ear protection,
DANGER PANTONE 485 C or RAL 3001 To get a new manual, call
and respirator when
(800) 523-4777 or go to
using this machine. WARNING PANTONE 151 C or RAL 2005
www.grizzly.com.
50 x 84mm
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
67 x 32mm
NOTICE
Add SAE 30 oil every 24 hours of operation.
121 x 13mm
G0453W
GEARBOX MUST
BE FILLED WITH OIL!
***
REFER TO
OWNER'S MANUAL
Requires 80W-90W
or Equivalent
Gear Oil.
609
102 x 102mm
ANSI COLOR CODES FOR SAFETY LABELS
DANGER PANTONE 485 C or RAL 3001
WARNING
PANTONE 151 C or RAL 2005
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
609
artwork changes are required, contact us immediately at manuals@grizzly.com.
REF PART # DESCRIPTION
601V2 P0453W601V2 MACHINE ID LABEL (G0453W) V2.08.16
601V2 P0453W601V2 MACHINE ID LABEL (G0453W) V2.08.16
602 P0453W602 DISCONNECT POWER LABEL
603 P0453W603 BELT COVER LABEL
604 P0453W604 GRIZZLY.COM LABEL
605 P0453W605 HANDWHEEL ROTATION LABEL
606 P0453W606 FEED SELECTOR LABEL
607 P0453W607 STOP CHECK OIL TAG
608 P0453W608 GRIZZLY NAMEPLATE
609 P0453W609 MODEL NUMBER LABEL (G0453W)
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
G0453W/ZW–G0454W/ZW (Mfd. Since 05/16)
Grizzly Planer
• Scale= 1:1
(unless otherwise noted)
Generic Labels
• Labels MUST be made of
chemical-resistant material
(12.24.15)
Labels marked *** have changed since last sending.
602
Labels marked *** have changed since last sending.
WARNING!
Grizzly Planer EYE/EAR/LUNG To reduce risk of death
or serious injury, read
INJURY HAZARD!
manual BEFORE using • Scale= 1:1
Always wear safety machine.
glasses, ear protection,
To get a new manual, call (unless otherwise noted)
Generic Labels and respirator when (800) 523-4777 or go to
using this machine. www.grizzly.com.
• Labels MUST be made of
50 x 84mm 50 x 84mm 50 x 84mm
(12.24.15) chemical-resistant material
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power. WARNING!
Always disconnect power before servicing.
67 x 32mm 36 x 32mm EYE/EAR/LUNG
INJURY HAZARD!
NOTICE
Always wear safety
Add SAE 30 oil every 24 hours of operation.
glasses, ear protection,
121 x 13mm 64 x 60mm and respirator when
using this machine.
50 x 84mm
67 x 21mm
GEARBOX MUST
BE FILLED WITH OIL!
To reduce risk of death
or serious injury, read
INJURY HAZARD!
manual BEFORE using
***
machine. To reduce the risk of serious personal
Only shift gearbox when injury, do not remove this cover while the
To get a new manual, call planer is running.
REFER TO machine is running or connected to power.
(800) 523-4777 or go to
OWNER'S MANUAL Always disconnect power before servicing.
www.grizzly.com.
Requires 80W-90W
or Equivalent
Gear Oil.
50 x 84mm 50 x 84mm 50 x 84mm
20 FPM Neutral 16 FPM
102 x 102mm 100 x 52mm
Add SAE 30 oil every 24 hours of operation.
ANSI COLOR CODES FOR SAFETY LABELS
INJURY HAZARD!
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
67 x 32mm
36 x 32mm
GEARBOX MUST
NOTICE
BE FILLED WITH OIL!
Add SAE 30 oil every 24 hours of operation.
614
121 x 13mm 64 x 60mm
64 x 60mm
• 1:1 Sizing (Labels are
actual size) ***
• Labels must be made of
oil-resistant material
67 x 21mm
67 x 21mm
GEARBOX MUST
OWNER'S MANUAL
BE FILLED WITH OIL!
Requires 80W-90W
• Scale= 1:1
(unless otherwise noted)
planer is running.
• Labels MUST be made of
chemical-resistant material
START
Only shift gearbox when
planer is running.
Neutral 16 FPM
REFER TO
OWNER'S MANUAL ANSI COLOR CODES FOR SAFETY LABELS
100 x 52mm
DANGER
Requires 80W-90W
or Equivalent
WARNING
Gear Oil.
20 FPM Neutral 16 FPM
102 x 102mm 100 x 52mm WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
193 x 108mm
ANSI COLOR CODES FOR SAFETY LABELS
DANGER CAUTION
PANTONE 485 C or RAL 3001 PANTONE 109 C
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005
50 x 84mm
50 x 84mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
36 x 32mm
Grizzly Planer
• Scale= 1:1
(unless otherwise noted)
Generic Labels
• Labels MUST be made of
64 x 60mm
(12.24.15) chemical-resistant material
Labels marked *** have changed since last sending.
• Scale= 1:1
(unless otherwise noted)
67 x 21mm
• Labels MUST be made of
chemical-resistant material 611
WARNING!
To reduce risk of death
EYE/EAR/LUNG
or serious injury, read
INJURY HAZARD!
manual BEFORE using
Always wear safety machine. Only shift gearbox when
glasses, ear protection,
To get a new manual, call planer is running.
and respirator when (800) 523-4777 or go to
using this machine. www.grizzly.com.
50 x 84mm 50 x 84mm
50 x 84mm
INJURY HAZARD!
20 FPM
Neutral 16 FPM
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing. 100 x 52mm
67 x 32mm 36 x 32mm
NOTICE
CAUTION PANTONE 109 C Add SAE 30 oil every 24 hours of operation.
NOTICE PANTONE 3005 C or RAL 5005 121 x 13mm 64 x 60mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
50 x 84mm 50 x 84mm
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
If
67 x 21mm
GEARBOX MUST
BE FILLED WITH OIL!
610 ***
Only shift gearbox when
planer is running.
36 x 32mm REFER TO
OWNER'S MANUAL
Requires 80W-90W
or Equivalent
Gear Oil.
20 FPM Neutral 16 FPM
102 x 102mm 64 x 60mm 100 x 52mm
ANSI COLOR CODES FOR SAFETY LABELS
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005
617
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
67 x 21mm
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
Only shift gearbox when
planer is running.
20 FPM Neutral 16 FPM
100 x 52mm
CAUTION PANTONE 109 C
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
If
MODEL G0453ZW
15" SPIRAL CUTTERHEAD
PLANER
Specifications WARNING!
Motor: 3 HP, 240V, Single-Phase, 60 Hz, 12A To reduce the risk of serious injury when using this machine:
Cutterhead: Spiral w/Indexable Inserts 1. Read and understand owner's manual before operating.
Replacement Inserts: H7319 (10 Pack) 2. Always wear approved safety glasses and respirator.
MODEL G0453ZW
Number of Inserts: 72 3. Disconnect power before changing inserts, removing machine
Cutterhead Speed: 5000 RPM components, or doing maintenance, service, or adjustments. 15" SPIRAL CUTTERHEAD
Cutterhead Diameter: 3" 4. Only plug power cord into a grounded outlet.
Feed Rates: 16 & 20 FPM 5. Do not wear loose clothing, gloves, jewelry, or other items that
Maximum Cutting Width: 15" can get entangled. Tie back long hair and roll up sleeves.
Maximum Cutting Height: 8" 6. Ensure machine is correctly setup before starting.
Specifications
Minimum Stock Length: 6" 7. Never cut deeper than 1/8" on a single pass.
Minimum Stock Thickness: 3/16" 8. Never plane material smaller than 8" long, 3/4" wide, or 3/16" thick.
To reduce the risk of serious injury when using this machine:
Motor: 3 HP, 240V, Single-Phase, 60 Hz, 12A
Maximum Depth of Cut Per Pass: 1/8" 9. Do not allow hands or clothing to get pulled into cutting area
1. Read and understand owner's manual before operating.
Cutterhead: Spiral w/Indexable Inserts
Weight: 525 lbs. while feeding workpiece.
2. Always wear approved safety glasses and respirator.
Replacement Inserts: H7319 (10 Pack)
10. Stand clear of board ends during cutting operation.
3. Disconnect power before changing inserts, removing machine
Number of Inserts: 72
11. Do not plane boards with cracks, loose knots, or other defects.
components, or doing maintenance, service, or adjustments.
Cutterhead Speed: 5000 RPM
12. Inserts are sharp! Use extreme caution when changing/adjusting.
4. Only plug power cord into a grounded outlet.
Cutterhead Diameter: 3"
13. Never reach into cutting area during machine operation.
Planer Generic Labels A
Labels marked *** have changed since last sending.
WARNING!
EYE/EAR/LUNG
Grizzly Planer
INJURY HAZARD!
• Scale= 1:1
Always wear safety
(unless otherwise noted)
glasses, ear protection,
Generic Labels
and respirator when
• Labels MUST be made of
using this machine.
(12.24.15) chemical-resistant material
50 x 84mm
Labels marked *** have changed since last sending.
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
WARNING!
To reduce risk of death
Add SAE 30 oil every 24 hours of operation.
or serious injury, read
manual BEFORE using EYE/EAR/LUNG
machine.
INJURY HAZARD!
To get a new manual, call
Always wear safety
(800) 523-4777 or go to
glasses, ear protection,
www.grizzly.com.
and respirator when
using this machine.
50 x 84mm 50 x 84mm
50 x 84mm
603
BE FILLED WITH OIL!
To reduce the risk of serious personal
injury, do not remove this cover while the
***
67 x 32mm
36 x 32mm machine is running or connected to power.
Always disconnect power before servicing.
NOTICE
121 x 13mm 64 x 60mm
67 x 21mm
Only shift gearbox when
planer is running.
REFER TO
***
or Equivalent
Gear Oil.
20 FPM Neutral 16 FPM
102 x 102mm 100 x 52mm
PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
NOTICE
PANTONE 151 C or RAL 2005 PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REFPART # DESCRIPTION
PLANER
WARNING!
609 P0453W609 MODEL NUMBER LABEL (G0453W)
610 P0453W610 INVENTORY COMPONENTS SHIPPING NOTICE TAG
611 P0453W611 EYE/EAR/LUNG INJURY HAZARD LABEL
612 P0453W612 ELECTRICITY LABEL
613 P0453ZW613 CONTROL PANEL LABEL (G0453ZW)
614 P0453W614 CHECK OIL NOTICE LABEL
615 P0453W615 READ MANUAL LABEL
616 P0453W616 GRIZZLY GREEN TOUCH-UP PAINT
617 P0453W617 GRIZZLY BEIGE TOUCH-UP PAINT
Grizzly Planer
• Scale= 1:1
(unless otherwise noted)
Generic Labels
• Labels MUST be made of
(12.24.15) chemical-resistant material
To reduce risk of death
Grizzly Planer or serious injury, read
manual BEFORE using • Scale= 1:1
machine.
(unless otherwise noted)
Generic Labels
To get a new manual, call
(800) 523-4777 or go to
• Labels MUST be made of
www.grizzly.com.
(12.24.15) chemical-resistant material
50 x 84mm 50 x 84mm
320 x 36mm
67 x 32mm 36 x 32mm
NOTICE
Grizzly.com Label Colors
To reduce risk of death
or serious injury, read
121 x 13mm 64 x 60mm
PANTONE 568 C
manual BEFORE using
machine. 605
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
67 x 21mm
GEARBOX MUST 50 x 84mm
50 x 84mm
INJURY HAZARD!
Only shift gearbox when
planer is running.
REFER TO
67 x 32mm
36 x 32mm
OWNER'S MANUAL
Requires 80W-90W
NOTICE
or Equivalent
Add SAE 30 oil every 24 hours of operation.
Gear Oil.
20 FPM
Neutral 16 FPM
121 x 13mm 64 x 60mm
Grizzly Planer
102 x 102mm 100 x 52mm
Generic Labels
ANSI COLOR CODES FOR SAFETY LABELS (12.24.15)
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
Labels marked *** have changed since last sending.
67 x 21mm
GEARBOX MUST
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005
BE FILLED WITH OIL!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING! Only shift gearbox when
planer is running.
REFER TO EYE/EAR/LUNG To reduce risk of death
or serious injury, read
INJURY HAZARD!
manual BEFORE using
OWNER'S MANUAL
Always wear safety machine.
glasses, ear protection,
To get a new manual, call
Requires 80W-90W
and respirator when (800) 523-4777 or go to
using this machine. www.grizzly.com.
or Equivalent
Gear Oil.
50 x 84mm 50 x 84mm
20 FPM Neutral 16 FPM
102 x 102mm 100 x 52mm
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
ANSI COLOR CODES FOR SAFETY LABELS
67 x 32mm 36 x 32mm
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005 NOTICE
Add SAE 30 oil every 24 hours of operation.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
121 x 13mm
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
GEARBOX MUST
BE FILLED WITH OIL!
607
***
REFER TO
OWNER'S MANUAL
Requires 80W-90W
or Equivalent
Gear Oil.
102 x 102mm
ANSI COLOR CODES FOR SAFETY LABELS
DANGER PANTONE 485 C or RAL 3001 CAUTION PANTONE 109 C
WARNING PANTONE 151 C or RAL 2005 NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
616
604
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
606
50 x 84mm
64 x 60mm
67 x 21mm
Only shift gearbox when
planer is running.
20 FPM
Neutral
100 x 52mm
If
608
-61-