G1021X2 Labels & Cosmetics - Grizzly G1021X2 Owner's Manual

G1021X2 Labels & cosmetics
219
213
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
206
using this machine.
220
210
208
REF PART # DESCRIPTION
201V2 P1021X2201V2 DISCONNECT POWER LABEL
202V2 P1021X2202V2 MACHINE ID LABEL V2.05.18
205V2 P1021X2205V2 SHIFT GEARBOX NOTICE V2.05.18
206 P1021X2206 TOUCH-UP PAINT, GRIZZLY PUTTY
207V2 P1021X2207V2 READ MANUAL LABEL
208 P1021X2208 TOUCH-UP PAINT, GRIZZLY GREEN
209 P1021X2209 EXTREME SERIES NAMEPLATE
210 P1021X2210 GRIZZLY NAMEPLATE-LARGE
Safety labels help reduce the risk of serious injury caused by machine hazards. if any label comes
off or becomes unreadable, the owner of this machine MuSt replace it in the original location
before resuming operations. for replacements, contact (800) 523-4777 or www.grizzly.com.
G1021X2 & G1021Z (Mfd. Since 08/16)
207V2 202V2
Specifications WARNING!
Motor: 3 HP, 230V, 1-Ph, 60 Hz To reduce the risk of serious injury when using this machine:
Full-Load Current Rating: 15A 1. Read and understand owner's manual before operating.
Cutterhead: 4 Spirals, 52 Inserts 2. Always wear approved safety glasses and respirator.
Replacement Inserts: H9893 3. Disconnect power before doing any service on machine.
Cutterhead Speed: 5000 RPM 4. Only plug power cord into a grounded outlet.
Feed Rates: 16 & 20 FPM 5. Do not wear loose clothing, gloves, jewelry, or other items
Max. Depth of Cut: 1/8"
that can get entangled. Tie back long hair and roll up
Min. Stock Thickness: 3/16"
sleeves.
To reduce risk of death
Min. Stock Length: 6"
6. Do not plane two boards of varying thickness at the same
or serious injury, read Max. Cutting Width: 15" time.
Max. Cutting Height: 6" 7. Never plane material smaller than 6" long or
manual BEFORE using
Weight: 520 lbs.
8. Keep fingers clear of pinch point between stock and table.
machine. 175370
9. Stand clear of board ends during cutting operation.
10. Inserts are sharp! Use extreme caution when servicing.
To get a new manual, call
11. Never reach into cutting area while machine is running.
(800) 523-4777 or go to
12. Do not expose to rain or use in wet or damp locations.
www.grizzly.com.
13. Prevent unauthorized use by children or untrained users.
G1021X2
209
201V2
3 / " thick.
16
216V2
Add SAE 30 oil every 24 hours of operation.
217V2
REF PART #
213 P1021X2213
215V2 P1021X2215V2 BELT COVER WARNING LABEL V2.05.18
216V2 P1021X2216V2 ADD OIL NOTICE V2.05.18
217V2 P1021X2217
218 P1021X2218
219 P1021X2219
220 P1021X2220
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
NOTICE
Only shift gearbox when
planer is running.
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
20 FPM Neutral 16 FPM
205V2
CHECK OIL
LEVEL BEFORE USING!
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
AMOUNT.
218
DESCRIPTION
ELECTRICITY LABEL
MODEL NUMBER LABEL V2.05.18
STOP OIL FILL TAG
INVENTORY SHIPPING NOTICE
EYE/EAR/LUNG INJURY LABEL
INJURY HAZARD!
215V2
-63-