Using Usb Connection For Installation - Konica Minolta bizhub 226 User Manual

10
Tips
- If you are using Windows 7/8/8.1/Server 2008 R2/Server 2012/Server 2012 R2, install the printer driver
first, and then associate it with this machine through plug and play.
- In Windows Vista/Server 2008, you can install the printer driver by creating a new port, even if the printer
driver is not installed in advance.
d
Reference
If the printer driver is not correctly installed, the driver must be updated using [Update Driver]. For details,
refer to page 10-13.
10.2.5

Using USB connection for installation

To connect this machine using the USB port, first install the printer driver and then associate it with this ma-
chine through plug and play.
0 In Windows 7/8/8.1/Server 2008 R2/Server 2012/Server 2012 R2, the installation disk cannot be spec-
ified after the connection has been established. Install the printer driver in advance.
0 In Windows Vista/Server 2008, you can continue the task and specify the printer driver installation disk
to install the printer driver if it is not installed in advance.
0 Administrator privileges are required to perform this task.
1
Install the printer driver for this machine.
% Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
For details, refer to page 10-4.
2
Connect this machine to the computer using a USB cable.
3
Turn on the power of this machine.
The printer driver for this machine is detected and the machine is ready to print.
% If the printer driver is not detected, restart this machine.
4
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] or [Devices and Printers] window.
d
Reference
If the printer driver is not correctly installed, the driver must be updated using [Update Driver]. For details,
refer to page 10-13.
10-12
Manually Installing the Printer Driver (for Windows) 10.2
bizhub 226