Table of Contents
Advertisement
With the OPTION menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Downloaded From projector-manual.com Toshiba Manuals
Multifunctional Settings (continued)
Multifunctional Settings (continued)
OPTION Menu
Item
Adjust the volume using the
VOLUME
High
Low
Select the TURN ON or the TURN OFF using the
SPEAKER
TURN ON
When the TURN ON is selected, the built-in speaker works.
Select a remote sensor using the
it using the ENTER button (2). :
IR REMOTE
(1) 1 : FRONT
memo
A sensor cannot be turned off when the other two are off.
Always at least one sensor is on.
Select a number as an ID number for remote control using the
ALL
1
The projector is controlled by the remote control whose ID CHANGE switch is
IR REMOTE ID
set into the position of the same number as this number. When the ALL is
selected, the projector is controlled by a remote control irrespective of the
position of the ID CHANGE switch.
memo
Please refer to the section "Using The Remote ID Feature".
Pressing
the
Select the RESET using
RESET
Selecting the RESET resets the count of the lamp timer to 0.
LAMP TIME
Perform this function only when you have replaced the lamp. The lamp
memo
timer counts the used time of the current lamp, to display the messages about
the lamp. Incorrect performing causes incorrect operation of the messages.
memo
About replacing the lamp, please refer to the section" Lamp".
Pressing
the
Select the RESET using
RESET
Selecting the RESET resets the count of the filter timer to 0.
FILTER TIME
memo
Perform this function only when you have cleaned or replaced the air
filter. The filter timer counts the used time of the air filter after cleaning or
replacement, to display the messages about the air filter. Incorrect performing
causes incorrect operation of the messages.
memo
About caring for the air filter, please refer to the section "Air Filter".
Description
/
buttons. :
TURN OFF
/
button (1), then switch
2 : TOP
3 : REAR (2)
2
3
or RESET button displays the LAMP TIME menu.
button
button to reset the timer. :
CANCEL
or RESET button displays the FILTER TIME menu.
button
button to reset the timer. :
CANCEL
(This table is continued to the following page.)
MENU
MAIN
VOLUME
16
PICTURE-1
SPEAKER
TURN ON
PICTURE-2
IR REMOTE
1: 2: 3:
INPUT
IR REMOTE ID
ALL
AUTO
LAMP TIME
1234 h
SCREEN
FILTER TIME
4321 h
OPTION
SERVICE
NETWORK
RESET
: SELECT
/
buttons. :
OPTION
IR REMOTE
1 : FRONT
(Off)
(On)
2 : TOP
3 : REAR
ENT
/
buttons. :
41
Advertisement
Table of Contents
