Using The Menus; How To Use The Menus; The Image Adjustment Menu - Toshiba TLP-XD2000 Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons p.16 on the control panel (main unit side) and remote control.

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
2. Select a Category
Select a category by using
There are following 5 categories:
Image adjustment menu p.35
p.37
Display setting menu
Default setting 1 menu p.40
Default setting 2 menu p.41
Status display menu p.42
3. Adjustments & Settings
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
use the following pages as a reference.
• To return to previous item, press the RETURN button.
4. End Press the MENU button.
(The menu disappears about 30 seconds after the last operation.)
All manuals and user guides at all-guides.com
Display the Setting display menu.
.
Press or to open the menu.
These marks
signify that there
are options.
Press or
to display a list of
options.
Toggle items with
Select items with
Fix selection with
34
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
These marks
signify that
there are setting
screens. Press
or to
display a list of
setting screens.
* When no item is
changed, press .
.
and press .
.
■ The image adjustment m
Use this menu to set or adjust image-
marked with "Yes", and those that can
it indicates that you cannot select for
Item
Contrast Adjust the image contr
Lower
Brightness Adjust the brightness o
Darker
Color Adjust the color of the
Lighter
Sharpness Adjust the sharpness o
Softer
Noise Set the function to red
reduction
*1
On (Enable)
Picture mode Press . Toggle the p
. 1/2/3
/
R-level Adjust red of the imag
/
Less red
G-level Adjust green of the im
Less green
B-level Adjust blue of the imag
Less blue
*2
NTSC mode Set the black level with
US
JAPAN
Auto setting Automatically adjusts i
samplingphase depen
input signal.
Position Press then change
and adjust with
Phase
Adjust to eliminate flick
Frequency
Adjust to eliminate per
flickering when many f
appear on the screen.
H-position
Adjust the horizontal p
Descr
: NTSC
: NTSC