Operating; Selecting An Input Signal - Toshiba TLP-SX3500 User Manual

24
Downloaded From projector-manual.com Toshiba Manuals

Operating

Operating

Selecting An Input Signal

Select an input signal.
1
■ Using the INPUT dial
Turn the INPUT dial of the projector.
Turning the dial cycles through the input ports as
shown below. Select the signal you wish to project.
M1-D RGB
VIDEO S-VIDEO
■ Using SEARCH button
Press the SEARCH button of the projector or the
remote control.
Pressing the button automatically cycles through input
ports and displays the picture of retrieved signal.
If no signal is found or the projector is unstable to
memo
find an input signal at any of its ports, it will turn to the state
it was in prior to the search.
M1-D RGB
VIDEO S-VIDEO
■ Using RGB button
Press the RGB button of the remote control.
Pressing the button toggles between the RGB ports
as shown below Select the signal you wish to project.
M1-D RGB
■ Using VIDEO button
Press the VIDEO button of the remote control.
Pressing the button toggles between the VIDEO ports
as shown below Select the signal you wish to project.
COMPONENT S-VIDEO
Use the ZOOM buttons to adjust the screen size.
2
Use the FOCUS buttons to adjust the focus.
3
BNC
COMPONENT
BNC
COMPONENT
BNC
VIDEO
SEARCH button
INPUT dial
VIDEO button
LASER INDICATOR
RGB button
STANDBY/ON VIDEO RGB
+ + +
LENS SHIFT FOCUS ZOOM
– – –
BLANK ASPECT LASER
PREVIOUS NEXT
MOUSE
SEARCH button
ESC MENU
POSITION RESET AUTO
MAGNFY PinP VOLUME
ON
FREEZE MUTE
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
FOCUS ZOOM
buttons buttons