Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Toshiba TLP-S10U
Summary of Contents for Toshiba TLP-S10U
- Page 1 OWNER’S MANUAL 3LCD DATA PROJECTOR TLP-S10 (SVGA)
-
Page 2: Before Using
WARNING: Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate USA only the equipment. - Page 3 IMPORTANT SAFETY INSTRUCTIONS (Continued) 5. Heat 8. Power-Cord Protection The product should be situated Power-supply cords should be away from heat sources such as routed so that they are not likely to radiators, heat registers, stoves, or be walked on or pinched by items other products (including placed upon or against them, amplifiers) that produce heat.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS (Continued) 16. Damage Requiring Service 18. Servicing Unplug this product from the wall Do not attempt to service this outlet and refer servicing to product yourself as opening or qualified service personnel under removing covers may expose you the following conditions: to dangerous voltage or other a) When the power-supply cord or...
-
Page 5: Label Locations
LABEL LOCATIONS MODEL NO. / RATING Label WARNING Label CAUTION Label CAUTION Label WARNING Label POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. Plug configuration Plug type Use a 5A fuse which is approved by ASTA SERIAL NO. -
Page 6: Exemption Clauses
Retain this information for future reference. EXEMPTION CLAUSES • Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, operating by third parties, other accidents, or use under abnormal conditions including erroneous or improper operation and other problems. -
Page 7: Table Of Contents
CONTENTS Before Using SAFETY PRECAUTIONS ... 2 IMPORTANT SAFETY INSTRUCTIONS ... 3 LABEL LOCATIONS ... 8 POWER SUPPLY CORD SELECTION ... 9 IMPORTANT PRECAUTIONS ... 9 EXEMPTION CLAUSES ... 11 OTHER CAUTIONS AND INFORMATIONS ... 11 CONTENTS ... 12 Preparations Checking the package contents ... -
Page 8: Preparations
Preparations Checking the package contents Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the product. (1) Remote control (6) Power cord (2) R03 (SIZE AAA) batteries for remote (7) RGB cable... -
Page 9: Names Of Each Part On The Control Panel And Remote Control
Names of each part on the control panel and remote control Control panel Remote Control CLASS 1 LED PRODUCT (15) (7) (8) (9) (10) (11) FAN TEMP LAMP (13) INPUT ON / STANDBY ZOOM (14) MENU VOL. VOL. AUTO SET KEYSTONE ZOOM. -
Page 10: Placement
Placement Placement Styles As shown in the figures below, this device can be placed in 4 different styles. The factory setting is “floor-mounted front projection.” Set the placement style in the default setting menu p.30 , in accordance with your needs. Floor-mounted front Floor-mounted rear Ceiling-mounted front... -
Page 11: Operations
Operations Turning the power on and off Connecting the power cord Insert the power cord connector into the AC IN socket of the projector. Insert the power cord plug into a wall or other power outlet. When the power cord is plugged in, the following three green indicators will come on for several seconds: ON, TEMP, and LAMP. -
Page 12: Basic Operations
Basic operations Turn on the power. Turn on the power by following the instructions in “Turning on the power” Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, menu for language and lamp power selection and configuration is displayed in English. -
Page 13: Using Handy Features
Using handy features I Using auto setting (Auto setting) This function sets up the projector to the optimum state for each type of the input signal by using simple operations. Press the AUTO SET button. The Auto setting menu appears. Press the AUTO SET button again. -
Page 14: Cutting Off The Picture And Sound Temporarily (Mute)
Using handy features (Continued) I Cutting off the picture and sound temporarily (Mute) When you want to project the images of another projector, overhead projector, etc. temporarily, this projector’s images and sound can be turned off. Press the remote control’s MUTE button. The picture and sound are cut off. -
Page 15: Displaying Information [Status Display]
Using handy features (Continued) I Displaying Information [Status display] This displays information about the input signal, lamp use time, etc. Press the button twice (or press the CALL button on the remote control once). When the button is pressed once, the Setting display menu appears. -
Page 16: The Image Adjustment Menu
Using the menu (Continued) I The image adjustment menu Use this menu to adjust image-related items. Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Item Description Computer Contrast Lower Higher Brightness Darker Brighter Color... -
Page 17: Maintenance
Maintenance Air filter cleaning The air filter prevents dust and debris from getting inside the projector. Never run the projector with the filter removed. It is recommended that the air filter is cleaned regularly. • The icon message “Check the air filter for dirt.” is displayed every 100 hours. (If the usage time exceeds 100 hours, this message is displayed for 30 seconds when the image is displayed for the first time after power is turned on. -
Page 18: Others
Lamp replacement (Continued) Remove the lamp cover. Loosen the 2 screws, then pull up to the direction of the arrow with your fingers on the area shown in the figure to remove the lamp cover. Pull out the lamp. Loosen the 2 screws holding the lamp in place, and pull up the handle to remove the lamp. -
Page 19: Before Calling Service Personnel
Before calling service personnel If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.35 as well. If This Happens Check • Is the power cord plugged in? Is it connected to the projector? No power p.35 •... - Page 20 Specifications (Continued) I List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. (Press the AUTO SET button, and adjust automatically or manually. Refresh rate Resolution Mode...
-
Page 21: Specifications
Specifications (Continued) I CONTROL terminal G Pin assignment Pin No. Signal Name Mini DIN 8 pin connector G Interface format 1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits; Stop Bit Length: 2 Communication format STX (02h) Command (3Byte) ETX (03h) Only 1 command valid per communication.