Troubleshooting; Related Messages - Toshiba TLP-SX3500 User Manual

Hide thumbs Also See for TLP-SX3500:
Table of Contents

Advertisement

When the unit's power is on, messages such as those shown below may be displayed.
When any such message is displayed on the screen, please respond as described below.
If the same message is displayed after the treatment, or if a message other than the
following appears, please contact your dealer or service company.
memo
minutes, it will be reappeared every time the power is turned on.
Downloaded From projector-manual.com Toshiba Manuals
T
roubleshooting
T
roubleshooting

Related Messages

Although these messages will be automatically disappeared around several
Message
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER ** hr.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER 0 hr.
NOTE
• A lamp has a finite product life. Lamps are characterized by the fact that,
after long hours of usage, a lamp will no longer light up, or the lamp will break or burst,
etc. This projector is equipped with an automatic shut-down function, such that the
power will automatically be turned off when lamp usage time has reached 2000 hours.
Please be aware, however, that among lamp types, there are major differences in
product lifetimes; a lamp may thus fail to light even prior to the functioning of the
automatic shut-down function of this projector.
Description
The time the lamp timer has counted is approaching
2000 hours.
Preparation of a new lamp, and an early lamp change is
recommended. After you have change the lamp, please be sure
to reset the lamp timer.
The time the lamp timer has counted is approaching
2000 hours, so a lamp change within
recommended.
When lamp usage reaches 2000 hours, the power will
automatically be turned off.
Please change the lamp by referring to the section "Lamp".
After you have changed the lamp, please be sure to reset the
lamp timer.
As the time the lamp timer has counted has reached
2000 hours, the power will soon be automatically
turned off.
Please immediately turn the power off, and change the lamp by
referring to the section "Lamp". After changing the lamp, please
be sure to reset the lamp timer.
(This table is continued to the following page.)
**
hours is
49

Advertisement

Table of Contents
loading

Table of Contents